Breadboard Arduino/Shrimp Components
Parts lists for my Arduino On A Breadboard, Standalone Arduino and/or a Shrimp projects:
- 100x 100nF capacitors
- 2x 400 point breadboards
- 170 point breadboard
- 10x LM7805 voltage regulators
- 100x 22pF capacitors
- 20x 16MHz crystals
- 50x 10uF capacitors
- 4x ATtiny85-20PU
- 2x Atmega 328P-PU – with Uno bootloader, one replacement and one new one
- 2x Atmega 328P-PU – no bootloader
- CP2102 USB UART – with DTR pin for programming Arduino’s without an Arduino
- 2x 20MHz crystals
- 5x CR2032 3V coin cell batteries
- 5x coin cell battery holders
- 40x male-male Dupont cables
- DT830D multimeter
- I2C backpack for 16×2 LCD
- HD44780 LCD
- BMP085 barometric pressure sensor
- DHT11 humidity/temperature sensor
- Nokia 5110 LCD – replacement
- 6m heat shrink tubing
- 5x Veroboards
- 4050 logic level converter (buffer)
- 5x LM1117T 3.3v voltage regulators
- Piezo buzzer, some 10k pots, some UV/IR/RGB LED’s, 1K thermistor and some barrel/block connectors
- 10x 2.1mm barrel jacks (female) – with breadboard pins
- 2.1mm barrel jack (male) – received 1/10 and a refund
- 60x 8-pin DIP sockets
- 30x 16-pin DIP sockets
- 10x 18-pin DIP sockets
- 20x 24-pin DIP sockets
- 10x 28-pin DIP sockets
- 50x diffused 5mm RGB LED’s – common cathode
- 5x CD4026BE decade counters – 7 segment drivers
- 10x CD4017 decade counters
- 5x DS1307 realtime clocks
- 10x 32.768KHz 12.5pF crystals
- 2x 4-bit 7-segment displays – common cathode (red)
- 5x MAX7219 LED drivers
- 2-channel 5V relay module – with optocouplers
- 10x ULN2803A Darlington arrays
- 5x TIP122 NPN transistors
- 100x 2N2222 NPN transistors
- Side cutters
- 13m 22AWG wire
- 10x 2.1×5.5mm barrel jack (male)
- 1.5m solder wick
- Some more ATtiny85’s, 10k resistors, coin cell holders, right-angled pin headers and some latching pushbuttons